# Community Promotion Ads - 2013

As it is December 2012, we are now going to reset our Community Promotion Ads for the new year.

### What are Community Promotion Ads?

Community Promotion Ads are community-vetted advertisements that will show up on the main site, in the right sidebar. The purpose of this question is the vetting process. Images of the advertisements are provided, and community voting will enable the advertisements to be shown.

### Why do we have Community Promotion Ads?

This is a method for the community to control what gets promoted to visitors on the site. For example, you might promote the following things:

• useful tools or resources for electronics work
• interesting articles or findings for the curious
• cool events or conferences
• anything else your community would genuinely be interested in

The goal is for future visitors to find out about the stuff your community deems important. This also serves as a way to promote information and resources that are relevant to your own community's interests, both for those already in the community and those yet to join.

### Why do we reset the ads every year?

Some services will maintain usefulness over the years, while other things will wane to allow for new faces to show up. Resetting the ads every year helps accommodate this, and allows old ads that have served their purpose to be cycled out for fresher ads for newer things. This helps keep the material in the ads relevant to not just the subject matter of the community, but to the current status of the community. We reset the ads once a year, every December.

The community promotion ads have no restrictions against reposting an ad from a previous cycle. If a particular service or ad is very valuable to the community and will continue to be so, it is a good idea to repost it. It may be helpful to give it a new face in the process, so as to prevent the imagery of the ad from getting stale after a year of exposure.

### How does it work?

The answers you post to this question must conform to the following rules, or they will be ignored.

1. All answers should be in the exact form of:

[![Tagline to show on mouseover][1]][2]

[1]: http://image-url
[2]: http://clickthrough-url


Please do not add anything else to the body of the post. If you want to discuss something, do it in the comments.

2. The question must always be tagged with the magic tag. In addition to enabling the functionality of the advertisements, this tag also pre-fills the answer form with the above required form.

### Image requirements

• The image that you create must be 220 x 250 pixels
• Must be hosted through our standard image uploader (imgur)
• Must be GIF or PNG
• No animated GIFs
• Absolute limit on file size of 150 KB

### Score Threshold

There is a minimum score threshold an answer must meet (currently 6) before it will be shown on the main site.

You can check out the ads that have met the threshold with basic click stats here.

-

-
 This one didn't achieve the threshold last year for some reason, but I'll try again. – SimpleCoder Dec 18 '12 at 2:03

-

-

-
This is a demonstration post to indicate how this should look when an ad is posted. It also doubles as your twitter ad, but it's up to you if you wish to promote it by voting. – Grace Note Dec 10 '12 at 15:31
I've never liked that graphic. It actually took me a while to realize it was a non-electronics guy's idea of a chip (apparently). The multiple notches and them being in the center of each edge make absolutely no sense. – Olin Lathrop Dec 13 '12 at 12:40
@OlinLathrop Yes, I am sorry you dont like the graphic, but it is the add to show off the twitter, If you would post an alternative I would enjoy it, but you are blocking an add to get people more involved because you dont like the chip picture. – Kortuk Dec 16 '12 at 6:04
@Kortuk: I am not "blocking" anything, just making a comment. I have re-read the question explaining community promotion ads a few times and still don't get it. Ads for other SE users to make them aware of EE would make some sense, or ads in the outside world to the EE part of SE, but that's not what the question seems to be saying. I'm having a hard time grasping who is supposed to be convinced to do what by these ads. – Olin Lathrop Dec 16 '12 at 14:57
@OlinLathrop you might link somewhere like here: circuitlab.en.malavida.com/webapps Or if you want other people to come to EE.SE then go to their SE site and post in their version of this thread. – Pureferret Dec 16 '12 at 18:23
@OlinLathrop: All of the ads will be displayed on this site and the purpose is two-fold. Some ads will be designed to direct traffic to areas of interest pertaining directly to this site (e.g. EE's Twitter feed). Other ads will link to websites/tools/blogs/etc. that we think visitors would find interesting (that's the Community in Community Promotion Ads). Pureferret makes a good point: If you want to direct traffic to this site, then the way to do this would be to create an ad on another site's Community Promotion Ads meta question. – SimpleCoder Dec 18 '12 at 1:59

-
 Thanks to Sasha for placing this image in the public domain. – Mark Booth Jan 5 at 3:12 For those who don't recognise the reference, see Marvin the paranoid android. – Mark Booth Jan 7 at 18:20

-
I think we need something more electronics related. :) – Nathan Campos Dec 17 '12 at 2:11

-
 Thanks to Daniel T. McDonald for placing this image in the public domain. – Mark Booth Jan 5 at 3:10 For those who don't recognise the reference, GIR is Invader Zim's malfunctioning robot. – Mark Booth Jan 7 at 18:20

-

-
@MarkBoothonce they're out of beta. – Pureferret Jan 4 at 20:24
@markbooth, they haven't got a community ads post though... – Pureferret Jan 5 at 7:25
Ah, sorry, I think you misunderstood me - I meant that your advert for scifi would work as well to advertise robotics here. *8') – Mark Booth Jan 5 at 10:50
UPVOTE ME!!!!! I AM LONELY. – Kortuk Mar 22 at 21:44

-
I don't get it. What is this advertising? Who is supposed to be convinced to do what by this ad? – Olin Lathrop Feb 24 at 15:09
I actually don't get it either. I wouldn't think it to be a moon. – Camil Staps Feb 28 at 18:48
@Camil: It's a reference to the Star Wars death star, but that still doesn't explain the purpose of this ad. Again, who is supposed to be convinced to do what by this ad? – Olin Lathrop Mar 17 at 14:09
@OlinLathrop the goal is to have you click it and look at scifi.SE. – Kortuk Mar 19 at 23:01
@Kortuk: In that case this is a totally ineffective ad, at least on me. – Olin Lathrop Mar 20 at 13:34